RubGuard

RUB CRACK SEAL

Product Serial No. RGP201801

Rubguard's RUB CRACK SEAL is a ready to use crack filling compound for both interior and exterior surfaces. It ensures unmatched crack bridging ability for plaster cracks of up to 3 mm.


Click here for warranty terms

PRODUCT BENEFITS:

  • Adhesion: Very strong adhesion on all absorbent surfaces like plaster, wood, gypsum, POP, asbestos, etc.
  • Usage: Single pack ready-to-use and easy-to-apply product.
  • Over coating: Easily over coated by water-based paints of Rubguard.
  • Crack filling ability: Strong filling capacity for cracks of up to 3mm width.
  • Flexibility: High elongation film which can accommodate movement.
  • Waterproofing: Water resistant film which can stop water ingress through cracks.
  • Mechanical strength: Reinforced with emulsion for superior mechanical strength

PRODUCT FEATURES:

  • COLOURS AVAILABLE: White
  • COVERAGE: For plaster cracks of 3mm width 5mm depth gives coverage of 75 running Feet per Kg
  • AVAILABLE PACKS: 900 Grams with shelf life of 1 year from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat
  • DRYING TIME TO TOUCH: 6 to 8 Hours
  • RECOMMENDED USAGE: Can be used for cracks on all interior and exterior absorbant surfaces, cracks and gaps caused by drying and shrinkage.

HOW TO APPLY:

(A) PRE-PAINTING STEPS:

CLEANING Open the cracks and widen the cracks to form a "V" Shaped groove. This will provide a strong base for adhesion of Crack Seal to the substrate. clean the area thoroughly to free it from dust and loose particles. It is recommended to use a cutter for opening the cracks.

PRIMING Post cleaning apply Rub Base Coat Primer in the opened cracks for interior cracks and for exterior cracks (as per regular dilution of 100% with water)

(B) APPLICATION PROCESS:
  • Apply First Coat of Rub Crack Seal with Putty Knife/ Towel without dilution
  • Apply Second coat of Rub Crack Seal with Putty Knife/ Towel after first coat
  • Level the surface with wall Putty
  • Primer and top coat with normal painting using Primer and top coat dries completely

PRODUCT INFORMATION:

  • Form: Ready to use
  • Density at 25ÂșC: 1.28
  • Drying Time: Minimum 6 hours depending on temperature and humidity
  • Flash Point: Crack Seal is a water based which is not flammable
  • Consumption: 75 - 80 running feet / kg / 2 coats (3mm wide and 5mm deep)

PRECAUTIONS:

Do not apply on wet surfaces.

Do not apply for cracks of more than 3mm width.

Use only for plaster cracks. Do not apply on structural on joint cracks.

SAFETY, HEALTH AND ENVIRONMENT INFORMATION:

  • Bucket must be kept in a secure, upright position and closed tightly.
  • In case of contact with eyes, immediately wash witha plenty of water and seek medical assistance if required.
  • It does not contain any Lead, Mercury or chromium compounds.
  • In case of contact with skin, wash immediately with plenty of water and soap.
  • Lead Contains does not exceed with 100 Parts per million in dried Rub Crack seal.
  • On request, safety data sheet is available for professional users.
  • It is recommended to use suitable personal protection equipment.
  • Don't empty in to drainages. Dispose of container and contents as per local rules and regulations.
  • Don't use empty container for storage of food.
Call: 9081085500